Licensed tile contractor · San Francisco
Tile Installation in San Francisco
Bathrooms and showers, kitchen backsplashes, floors, large-format porcelain, natural stone and microcement for San Francisco homes and businesses. We handle the demo, floor prep and permit, help you source the tile, and can usually start within two to three weeks.
- LicenseCA CSLB #842224 · insured & bonded
- ExperienceSetting tile since 2001 · in business since 2004
- Start dateUsually 2–3 weeks out
What we install
Tile work for every room in the house.
We’re a San Francisco tile contractor, and the same prep and layout standards apply whether it’s a full shower rebuild or a small repair.
Bathrooms & showers
Custom showers built on full-height waterproofing and a flood-tested pan, including curbless showers, linear drains and mitered niches. How shower waterproofing works
Kitchen backsplashes
Zellige, handmade and specialty tile, with the layout worked out around outlets, corners and the hood before the first tile goes up. Read our zellige guide
Tile floors
Subfloors checked and corrected first, so the floor stays flat and the joints stay tight, from bathrooms to kitchens and living areas.
Large-format porcelain & GPT panels
Gauged porcelain panels up to 48″×110″ and book-matched slabs, set flat with lippage you can’t feel. GPT panel installation
Natural stone & microcement
Marble and stone laid out to suit the material, and seamless microcement floors and walls troweled over a rebuilt, flat substrate.
Small jobs & repairs
Cracked or loose tiles, failed grout and caulk, or a shower that has started to leak. We take small jobs and repairs, not only full remodels.
One crew, start to finish
We handle the parts most tile installers leave to you.
- PermitsWe can pull the permit for your tile project when the job needs one.
- MaterialsWe help you source the tile and gather the setting and waterproofing materials.
- Demo & prepWe do the demolition and floor prep ourselves, so the substrate is right before tile.
- SchedulingMost jobs start two to three weeks out, which leaves time to get tile and materials on site.
Local experience
San Francisco homes are not standard homes.
Much of the city’s housing is decades or a century old, and tile here has to account for that. Knowing the building stock is half the job.
- Old floors and framing. Out-of-level floors, soft subfloors and walls that aren’t plumb get corrected before any tile is set.
- Movement. Houses settle and the ground moves, so corners and changes of plane get flexible sealant instead of hard grout, and floors get the right underlayment.
- Moisture. Fog, older ventilation and showers built without real waterproofing are why we treat what’s behind the tile as the most important part.
- Tight spaces. Narrow stairs, shared walls and street parking are part of the job, and we plan the work around them.

How we build it
The work you see depends on the work you don’t.
Substrate
Deflection checked, subfloor corrected, backer set and fastened to spec. Everything after this depends on it.
Waterproofing
Full height on every wet wall, with sealed corners, penetrations and drain, using one manufacturer’s matched system.
Layout
The field is dry-laid and resolved before a tile is set, so cuts are balanced and the pattern lands cleanly at every edge.
Finish
Full mortar coverage, lippage you can’t feel, clean grout joints and silicone at every change of plane. Then we clean up.
Every shower pan is flood tested first.
Before any tile goes down, we plug the drain and fill the waterproofed pan with water. On the job in this video, the pan held water for a full 24 hours before we set any tile. It costs a day and catches problems while they’re still cheap to fix.
See the systems we use, including Schluter KERDI and Hydro-Blok, in our guide to shower waterproofing.
Recent work
Tile projects in San Francisco.


Zellige kitchen backsplash, Sunset District
Counters protected and walls prepped, then about 30 square feet of handmade zellige set behind the sink and around the outlets in two workdays.
“His attention to detail was exceptional.” Kevin R., Google review

Fiorella, Clement Street
Commercial tile in the Richmond District: white subway walls, floor prep and hexagon mosaic flooring with the restaurant’s name set in dark tile.


Highland Ave microcement floor
Dated mosaic taken out, the substrate rebuilt flat, and a seamless microcement floor with no grout joints left to fail.
Where we work
Tile installation across San Francisco.
We work in every part of the city. Not sure if we cover you? Call and we’ll tell you straight. We also work across Marin County.
- Pacific Heights
- Noe Valley
- Presidio Heights
- Cow Hollow
- The Marina
- Russian Hill
- Nob Hill
- Sea Cliff
- Richmond District
- Sunset District
- Bernal Heights
- Potrero Hill
- The Mission
- Glen Park
- St. Francis Wood
- Forest Hill
Google reviews
What San Francisco clients say.
★★★★★
“We couldn’t be happier with the beautiful zellige kitchen backsplash Albert from Chevy Tile and Stone installed in our home. The project was roughly 30 square feet of tile work, and he completed it in just two workdays. He was punctual, worked quickly and neatly, and kept the workspace clean throughout. His attention to detail was exceptional, and the finished result shows how much care he puts into his work.”
Kevin R. · Zellige kitchen backsplash
★★★★★
“Albert is the best! Knowledgeable, efficient, good communicator. I think of him every time I shower since he fixed a hole in the tiles and another in the ceiling and now I have a nice bathroom again!”
Benjamin C. · Shower repair
★★★★★
“Chevy Tile and Stone was awesome! Did an amazing job in our shower, and saved us time, money and headaches! Probably one of the best tile services in San Francisco!”
Lars T. · Shower tile
Questions
San Francisco tile installation FAQ
How much does tile installation cost in San Francisco?
It depends on the size of the space, the tile you choose and what we find underneath once the old tile or flooring comes up. We walk the space with you, talk through tile, layout and waterproofing, and give you a clear estimate for the work. Estimates are free.
Do you pull permits in San Francisco?
Yes. We can pull the permit for your tile project when the job needs one, so you don’t have to deal with it yourself.
How soon can you start?
Most jobs start two to three weeks out. That time is used to source your tile and gather the setting and waterproofing materials, so everything is on site when we begin.
Can you help me choose and buy the tile?
Yes. We help you source the tile and gather the raw materials the job needs, including thin-set, grout and waterproofing.
Do you handle demolition and floor prep?
Yes. Our crew does the demo and the floor prep, including correcting the subfloor, before any tile is set.
Do you take small jobs and repairs?
Yes. We take small jobs and repairs, such as replacing cracked tiles, regrouting, fixing failed caulk or repairing a leaking shower, as well as full remodels.
Do you work with designers, general contractors and businesses?
Yes. We work directly with homeowners and alongside interior designers and general contractors, including commercial projects like the Fiorella restaurant on Clement Street.
Are you licensed and insured?
Yes. Chevy Tile & Stone is a licensed California contractor, CSLB #842224, insured and bonded. Certificates of insurance are available on request.
Free estimate
Tell us about your San Francisco tile project.
Send the short form with your neighborhood and what you’re planning, or call us. We reply within one business day, then walk the space and give you a real number for the work.
(415) 748-5788Mon–Fri · 8am–5pm